Loading color scheme

Pressure pipes from PVC with socket

Pipes and shaped parts are made from unplasticized polyvinyl chloride (PVC-U), nominal diameter from 90 mm to 630 mm, three limits of working pressure 0.6, 1.0 and 1.25 MPa.

Pipes are gray, with smooth inner and outer surfaces. The connecting and sealing element is a seal made of a special rubber profiled shape, which is placed in the groove of the socket. The connection of this type is a detachable connection, which allows the mutual movement of the elements of the pipeline and compensation of elongation. PVC-U pipes can also be connected to traditional (cast iron, steel) fittings. The operating temperature of the pipes is up to 45 ° C.

Application of pipes

Pressure pipes and shaped parts of PVC-U are used for installation of pressure systems transporting the purified drinking water, technical, water for irrigation, industrial, household sewage and other liquids which do not have destructive action on PVC-U and EPDM rubber from which sealants in bell-shaped seals are made. connection.

Advantages of PVC-U pipes

  • Low bulk density (1.4 g / cm2) is approximately 5-7 times less than the weight of steel and cast iron;
  • Service life of at least 50 years;
  • Resistance to electrolytic corrosion caused by stray currents;
  • PVC-U pipes are non-toxic. The stench may be a tolerance for water supply in feed water supply systems;
  • The smoothness of the inner surface helps to reduce pressure losses and therefore reduces energy consumption in the process of transporting fluid;
  • Resistance to sediment fouling (there is no narrowing of the inner diameter of the pipe);
  • Significant chemical resistance to the environment in the range pH2-pH12;
  • Easy to install without the use of special equipment.
Outer diameter
pipes, mm
Type Thickness
walls, mm
Length
pipes, mm
90 Tube SDR 26 PN 10 4,3 6
Tube SDR 41 PN 10 2,8 6
110 Tube SDR 26 PN 10 4,2 6
Tube SDR 41 PN 6 2,7 6
160 Tube SDR 26 PN 10 6,2 6
Tube SDR 41 PN 6 4,0 6
225 Tube SDR 26 PN 10 8,6 6
Tube SDR 41 PN 6 5,5 6
315 Tube SDR 26 PN 10 12,1 6
Tube SDR 41 PN 6 7,7 6
400 Tube SDR 26 PN 10 15,3 6
Tube SDR 41 PN 6 9,8 6
500 Tube SDR 26 PN 10 19,1 6
Tube SDR 41 PN 6 12,3 6
630 Tube SDR 41 PN 10 15,4 6

 

The knee will split

pvh kanalizaciya  Diameter Degree
90 11° 22° 30° 45° 67° 90°
110 11° 22° 30° 45° 67° 90°
160 11° 22° 30° 45° 67° 90°
225 11° 22° 30° 45° 67° 90°
315 11° 22° 30° 45° 67° 90°
400 11° 22° 30° 45° 67° 90°
500 11° 22° 30° 45° 67° 90°

 

Feed-through coupler

mufta Diameter
90
110
160
225
315
400
500

 

O-ring

mufta Diameter
90
110
160
225
315
400
500

 

Flange connection

mufta Diameter
90
110
160
225
315
400

 

Flange connection with socket

mufta Diameter
90
110
160
225
315
400

 

Reduction of PVC socket-socket

mufta Diameter
160х110
225х110

 

The tee is PVC socket-shaped

pvh kanalizaciya  Dimensions mm Degree
110х110х110 90°
160х160х160 90°
225x225x225 90°
315x315x315 90°

 

Tee PVC socket / flange / socket

pvh kanalizaciya  Dimensions mm Degree
90x90x90 90°
110х110х110 90°
160х160х160 90°
315x315x315 90°

 

Tee PVC socket/ flange / smooth

pvh kanalizaciya  Dimensions mm Degree
110x110x110 90°
160х110х160 90°
160х160х160 90°
225х160х225 90°
225х225х225 90°
315x315x315 90°

 

PVC tee bell socket

pvh kanalizaciya  Dimensions mm Degree
160х160х110 90°
225х225х110 90°
225х225х160 90°
315x315x110 90°
315x315x160 90°

 

Tee PVC socket / flange / socket

pvh kanalizaciya  Dimensions mm Degree
160х110х160 90°
225х110х225 90°
225х160х225 90°
315x160x315 90°
315x200x315 90°

 

PVC tee smooth / socket/ socket

pvh kanalizaciya  Dimensions mm Degree
110х110х110 90°
160х110х160 90°
160х160х160 90°
225х110х225 90°
225х160х225 90°
225x225x225 90°
315x315x315 90°

 

Tee PVC socket / internal. carving / smooth

pvh kanalizaciya  Dimensions mm
90x1 1/2"
110x2"
160x2"