Loading color scheme

  • Pressure pipes from PE-100 polyethylene for water supply

    Pipes are made of low-pressure high density polyethylene (HDPE) type PE-100 according to DSTU EN 12201-2:2018.

  • Pressure pipes from PVC with socket

    Pipes and shaped parts are made from unplasticized polyvinyl chloride (PVC-U), nominal diameter from 90 mm to 630 mm, three limits of working pressure 0.6, 1.0 and 1.25 MPa.

  • Sewer pipes from PVC with socket

    In the construction of external sewerage pipelines mainly used pipes made of unplasticized polyvinyl chloride (PVC-U).

  • Pressure pipes from PE-100 polyethylene for gas supply

    Polyethylene pipes PE-100 for the supply of flammable gases Ø 25 ÷ 500 mm, pressure up to 1.0 MPa, manufactured in accordance with DSTU EN 1555-2:2012.

  • Compression fittings

    Unidelta compression fittings are made of PP-B polypropylene with ultraviolet protection.

  • Butt Fittings

    Butt fittings are used to connect gas and water pipes, most often with their help offshoots and turns are formed in pressure systems.

  • Sewer wells

    Casing pipes are intended for construction of water intake wells, and also technological wells.

  • Sewer wells

    Sewage wells are objects of a sewer nets (systems) which allow carrying out temporary operational works in a nets.

  • Corrugated drainage pipes

    Drainage pipes are used in construction to drain rainwater and groundwater below the drainage level of the facility.

  • POLYCORR corrugated pipes are for external sewerage

    Corrugated two-layer pipes from PP-B polypropylene with a nominal diameter from 200 mm to 800 mm with ring stiffness of SN4, SN8, SN12, SN16